--Ref#: 103160

Click here to Contact us about this item
Photo: View Photo
View Photo
View Photo

Georg 41" x 6.30" x 15,000 # Slitting Line

Model:                       KS160/250-1000W 
Materials:                   GO, GNO, Copper, Alum.
Min./Max. Coil Width:        2 - 41" (Trimmed) 
Thickness Range:             0.006" - 0.018" (GO/GNO) 
                             0.005" - 0.100" (Copper, Alum.) 
Width Tolerance:             +/- 0.001" 
Max. Shear:                  14,000 PSI (Alum.) 
                             23,000 PSI (GO/GNO) 
                             81,000 PSI (GO/GNO) 
Max. Coil Weight (Entry):    15,000# 
Max. Coil Weight (Exit):     6,000# @ 8" Dia. Drum
                             15,000# @ 24" Dia. Drum 
Coil I.D. (Entry):           16" - 19" / 19" - 22" with Risers 
                             22" - 24.5" with Risers 
Coil I.D. (Exit):            8" & 24" 
Max. Coil O.D.:              55" 
Line Direction:              Right to Left 
Mode of Operation:           Pull Thru / Driven 
Line Speed:                  0 - 660 FPM (GO/GNO)
                             0 - 260 FPM (Alum./Copper)

Consisting of the following:

-Entry Coil Storage Saddle:
  Two (2) Full Width Coils 

-Entry Coil Car:
  Pit Type 
  Powered Lift and Traverse

-Uncoiler:
  Single Mandrel Type 
  Hydraulic Expansion 
  Sliding Base 
  33.5 HP DC Motor Driven 
  Holddown with Powered Snubber Roll 
  Two (2) Sets of Bolt-On Risers (not confirmed) 

-Automatic Edge Guide:
  Photo Electric Operation 

-Entry Unit:
  Extending Blade Peeler 
  Powered Entry Pinch Rolls 
  Drag Type Tension Pad 

-Slitter Head:
  Manual Side Guides 
  6.3" (160 mm) Diameter Arbors 
  Manual Top Arbor Adjust 
  Adjustable Fingers 
  Powered Entry Pinch Rolls 
  Manual Scrap Guides with Shute
  20 HP DC Motor 

-Scrap Baller:
  DC Motor powered
  Scrap Ball removal by Hydraulic Cylinder 

-Pit Section:
  Entry Centenary Section  
  Powered Carry Over Table

-Combination Tension Stand:
  Powered Traverse to Carry Over Strip 
  Exit Centenary Section 
  Three (3) Separator Tooling Shafts 
  Two (2) Drag Boards 
  Tension Rolls (Rubber Coated) 
  25 HP DC Motor Braking System 
  Exit Passline Rolls (Rubber Coated) 
  Recoiler Feed Table 

-Turret Recoiler:
  8" Dia. and 24" Dia. Drums
  Powered Horizontal Rotation 
  Hydraulic Pushoff (Base Mounted) 
  Powered Expansion (both drums) 
  Powered Gripper (24" Dia. Drum) 
  Holddown Arm 
  75 HP DC Motor 

-Exit Coil Car:
  Pit Type 
  Powered Lift and Traverse

-Exit Turnstile:
  Two (2) Arms x 15,000# Each Arm @ 24" ID 
  One (1) Arm x 6,000# @ 8" ID 
  Powered Rotation 

-Electrical Controls:
  Main Operators Control Console 
  Auxiliary Operators Stations 
  AC & DC Control Cabinets 
  ABB Drive System (New in 2013)

-Slitter Tooling:
  Hub and "Packed" Arbor Tooling 
  Carbide Knives 
  Steel Spacers 
  Rubbers 
  Misc. Separator Tooling 

-Hydraulic System 

-Spare Parts 

Removed and in storage; Rockford, IL.

 

 


About StrongMach | Features | Catalog | Contact

Copyright 1998 StrongMach, Inc.